technical data
housing dimensions | 400 x 250 x 160 mm (W x H x D) |
power supply | 100 ... 240 Volt / 50 ... 60 Hz |
operating voltage | about 20 Volt |
conductivity measuring range | 0.05 μS/cm to 10 μS/cm or 1 μS/cm to 1 mS/cm |
conductivity threshold value | parameterizable within the measuring range |
discharge valve control | potential-free contact, optional relay for switching the supply voltage for the discharge valve |
condensate monitoring from the steam boiler
Conductivity-Control
In steam boiler systems, it is important that sufficient amount of condensate is present with good quality. With the help of Conductivity-Control, continuous conductivity monitoring and targeted discharge control of contaminated condensates are carried out. Its constant control increases the process reliability and energy efficiency of the steam boiler system.
at a glance
- range control of conductivity and temperature of the condensate
- triggering of alarm and possibly control of the discharge valve
- data storage in the electronic operating diary or USB stick
- no use of indicators
- continuous measurement
ideal solution for
- food industry
- big laundries
- beverage industry
prevents
- defects
- consequential damages by corrosion
- deposits
advantages
- continuous monitoring of condensate flow
- if the threshold value is exceeded, the alarm and control of the discharge valve occur
- in case of the undercut of the threshold value, a service alarm occurs
- visualization of measured values and manual control via display
- optionally, networking with higher-level control centers and remote maintenance is possible
further products
OFS GmbH
µdox
handheld meter - accurate, fast and reliable
for pH, dissolved oxygen, redox, total hardness and acid capacity
FWS-Control
control of feed water and steam boiler with quality controlled dosage
for more efficiency and cost savings
FWO-Control
monitoring of feed water boiler with exhaust vapor control
for more process safety
Conductivity-Control
monitoring of conductivity in condensate
measuring range 0.05 µS/cm ... 1 mS/cm
O2-Control
monitoring of feed water with qualitative dosage
for improved efficiency of boiler operation